j-studios

Planning Your DIY Project

Planning Your DIY Project

Ready to start your first serious DIY project?

Read through the checklist below to make sure you are well prepared to start – and finish! – the job:

1. Do an overview of the project

Making sure that you understand all its requirements. Sometimes imagining that you have been hired to do the job may help you take a better perspective on what it will take to complete the task.

2. Be realistic about your expectations

If you are just a beginning DIYer, consider completing a few small projects (like putting up shelves or fixing a garden fence) before attempting a major one.

Ideally, for your first big DIY project, you should select an area where it will least affect your lifestyle if left unfinished – for example, your basement or outdoors. Don’t attempt replumbing the house as your first project!

3. Know where to seek help if needed

Your sources might include DIY books and magazines, relevant web sites, and DIY-savvy friends and relatives. If you are about to venture into a whole new territory, you might find it helpful to hire a professional for a few hours and try to learn the essential techniques from them.

4. Make a list of materials you need

Buy them all BEFORE you start the project. This will minimize the need for frustrating runs to the store, allowing you to focus on the job completely.

There are many online tools available for estimating a quantity of the materials (like paint or tiles) that you need for a project – make use of those to save time. It is also a good time-saving idea to add about 10% to your calculated material requirements to allow for waste.

5. Make a realistic budget

Remember to budget for little things such as nails, screws, hinges etc. The little things, when combined, tend to add up to significant amounts that are often overlooked during the planning stage.

6. Make a schedule

Be sure to allow for unexpected delays or having to redo parts of the project. If your project is based outdoors, don’t forget to take weather conditions into account.

Consider how possible interruptions in the project are likely to affect your daily routines and plan accordingly. For example, if your place has only one bathroom, you would want to finish any bathroom renovation project as quickly as possible.

As with material estimators, there are time estimates available online and in printed sources on how long it takes to complete certain tasks. Again, adding 10% to the suggested time requirement may save you unnecessary frustration.

Remember that every project is unique. Think where you are most likely to encounter problems, and allow extra time for figuring out solutions. Some problems are fixed pretty quickly – it is figuring out how to do it that can be time-consuming.

7. Know what motivates you best and have a strategy on how to stay motivated.

It is important to understand what motivational strategy works best for you and use it consistently. Have a clear goal in mind all the time while you are on the project.

Asking yourself two simple questions:

“what will happen if I do?” and “what will happen if I don’t?”

Is one effective motivational technique. This is especially true in the case of DIY, where your actions or lack thereof are likely to have immediate – and tangible – results.

8. Last but not least

Don’t beat yourself when something does not go according to plan, especially if you are just starting out. This includes bad time estimates that tend to be the number one cause of frustration in DIYers.

Remember that no job is the same no matter how many times you do it, so you cannot possibly plan for everything. That said, your estimating and project management skills should improve over time.

DIY Demolition: Important Dos and Don’ts

Not everybody might have the skills or time to do a complete renovating job. However, nearly anyone can grab a sledgehammer and pry bar and then jump into the early phase of the most projects that is demolition.

Not only it is so pleasurable to finally remove the pink tile that you have always detested or the wall which should have been a window, but also it can save money in the process if you are doing it yourself.

But before you begin to have fun, you have to know several basics, like how to do it safely and how to find out what is hidden behind a wall.

DIY Demolition: Important Dos and Don'ts

Urgent! Don’t forget to protect yourself.

If you are not dealing with a serious environmental threat, for instance, coats of old lead-based paint or asbestos paint since lead contains high toxin that can cause various health problems, you may wear personal protection consisting of safety glasses, a dust mask, and work gloves.

However, if you are digging into insulated walls, it would be much better for you to wear a long-sleeved shirt with closed collars as well as cuffs to guard against skin irritation. If you are dealing with asbestos paint, the recommended measure is hiring a removalist to perform asbestos testing in Sydney.

Although asbestos paint only contains 5 to 10% of asbestos, this amount was sufficient to cause a deadly situation to arise in those to this dangerous substance. Keep your current work area clear enough to give secure footing. Don’t do an activity on a pile of debris. That means you will have to stop regularly–but you will perhaps be ready for the breather.

Do remember that you will be dealing with all the debris a second time when you go to a Dumpster, so cut large parts into smaller pieces so that it will be easier to handle. Additionally, a hammer to crook the business end of nails sticking out from lumber.

Keep safe your home from harm.

To protect other areas of the house, hang plastic sheeting or drop cloths over doorways. Another alternative is to set up a “dirty room” of 1-by-2s coated with plastic sheeting to take in debris and dust in a limited workspace. In spite of that, close and cover heating as well as air-conditioning ducts–any passage that could carry dust to other areas.

Wrapping plastic and sealing edges using tape requires extra time. But the investment will significantly reduce cleanup–like emptying, washing also restoring each item in kitchen cabinets. Demolition dust is prevalent.

Look out for hidden mechanicals.

Outlets, switches, and duct registers give almost obvious clues. However, an interior wall may also hide wires and pipes on route to and from a neighbouring bath or kitchen. Following cutting off the supplies, any pipe or wire can be rerouted. But the main plumbing vent is better left in place.

This pipe with a large diameter often runs from the basement along the roof and connects to all plumbing fixture heading towards. The best and safest procedure to avoid surprises is to demolish surface materials such as tile and then remove a few drywall panels to inspect what is hidden underneath.

Get familiar with your walls.

Partitions only divide area. They can be removed without having to add or replace any framing since they don’t support the building.

On the other hand, bearing walls support the structural weight. They can be removed, but it requires much effort and quite hard. You need to sustain temporary supports when the wall comes down, then provide a permanent header beam to support the load which the wall used to carry.

Usually, all exterior walls are supporting walls and not all, although most, interior walls are partitions. Interior walls that frequently are load bearing incorporate walls stacked in line one story to the other as well as walls along a central stairwell.

It is a difficult subject, and surprisingly some of the contractors do not have the ability to tell the difference before drywall is removed and framing is revealed. But it is an important distinction. Demolish a bearing wall by mistake, and nearby framing is sure to crumble or could even fall to pieces.

Peel off drywall and remove studs.

Use a sabre saw to slice through panels near studs –cutting only through the 1/2-inch thickness—after that cut the large panels and later handle the studs. But it is more usual to get a handhold on the edge of a panel by taking out nails or removing a seam with a flat bar. Next, you can separate the panel in ragged sections using the hand.

Discard the debris.

Usually, you must pay someone to throw away the stuff. To rent a roll-off container is the most efficient alternative is –a Dumpster–available in many sizes. The carting company drops the debris off for several days or weeks, then gathers it up fully loaded when you are finished with demolition.

Click here for more information on doing Demolition yourself.

DIY Steps To Protect Patio and Outdoor Furniture

Have you been searching for some simple home renovation suggestions?

If so, you are reading the perfect article. This report provides lots of quick fixes which you may make around your property. Read on.

DIY Steps To Protect Patio and Outdoor Furniture

Squeaky Hinges of Doors

You can fix the problematic door hinges by spraying a bit of WD-40. As an alternative, you may rub a bit of petroleum jelly onto the straps.

If these methods don’t work, you can raise the pings of the hinges around halfway and then lubricate them with a small quantity of oil. This will fix the matter in a few seconds.

Squeaky Floor

If you would like to repair the floor temporarily, you can sprinkle a little talcum powder on the region which produces noise and then sweeps it into the floor cracks. Taking away the traces of powder is a fantastic idea if you’re planning to refinish the floor later on.

Peeling Wallpaper

It is possible to use a sharp knife to smear some wallpaper glue onto a writing paper. Next, you can rub on the paper underneath the section which you would like to peel off.

Now, you need to push the background on the wall slipping out the paper and smoothing the bubbles using fabric.

Worn Caning

With time, you can experience a little sagging, which can be natural. If you want to repair the issue, all you have to do is wet the bottom of this caning with lukewarm water. Then you need to let it dry immediately.

Dusty Chandelier

Allow the fixture cool down. Put on a pair of gloves. You should dampen one glove with glass cleaner. Next, you need to wipe every one of the prisms with the moist glove and then the sterile glove.

Stained Tub

Produce a paste with an equal quantity of baking soda and cream of tartar. At this time, you should drop a few drops of lemon juice in the paste and then blend the whole thing.

Then it is possible to use a soft cloth to rub the paste on the stains. After an hour or so, you should rinse with water.

Stuck Sliding Windows

In case you have some sliding windows which are stuck, you can use a little bit of silicone spray lubricant to grease the skids.

All you need to do is spray on the lubricant on a bit of rag and then use the rag to wipe the paths. That is it.

Hard-to-Remove Decals

Again, you can use WD-40 on the decals and the regions around them. You need to elevate the advantages to get access to the bottom of the decals. After you are done, you should scrap away all the decal using a charge card.

Slamming Door

If you would like to soften the slamming doors, you may use some peel-and-stick weather stripping on the doorstep. As an alternative, you may use a rubber band around the knobs of the doorway on both sides. Leave the latch uncovered.

Thus, these are a few hints to assist you to renovate your house and manage the common issues. Hopefully, this advice will work for you as well.

7 DIY Techniques Black Mold Removal

Black mold is a widespread issue almost every individual undergoes throughout their lifetime. It can be a serious threat to everyone living in your property.

Indicators of black mold could range from skin problems to congestion and coughing to even developing associated asthma difficulties.

It’s best to deal with any mold infestations as swiftly as possible to avoid any health and home harms. Make certain to wear the proper protective gear such as respirator and gloves when cleaning.

It’s almost always a good idea to also ventilate your work place while killing black mold since some of these chemicals are poisonous indoors.

7 DIY Techniques Black Mold Removal

Here’s a list of the seven best methods to remove black mold in the home:

  • Ammonia
  • Bleach
  • Tea Tree Oil
  • Baking Soda
  • Hydrogen Peroxide
  • Grapefruit Seed Extract
  • Vinegar

Black Mold Removal with Ammonia

Always wear gloves and a respirator when working with ammonia based cleaning solutions. Never, ever, ever mix ammonia with chlorinated bleach.

Ammonia is a good disinfectant that does a fantastic job of killing molds on non- porous surfaces such as sinks, counters, or shower doors.

However, ammonia, like bleach does a fairly lousy job at penetrating and murdering porous surfaces like particle boards, woods, tiles, etc..

To kill molds on these types of materials, you want a solution which will permeate to the root level.

Some other mold agents are up for the job and not as harsh on you or the surroundings. A great alternative may be baking soda and vinegar.

If you do decide to use ammonia, here is what you will need to know:

  • Open neighbouring doors and windows to get Decent air flow
  • Blend ammonia with water at a 1:1 ratio
  • Pour the mix into a jar with a spray nozzle
  • Spray the contaminated areas evenly and let sit for 5-10 minutes
  • Scrub the mold area with a small brush and then wipe clean
  • Repeat as needed.

Black Mold Removal together with Bleach

As mentioned previously bleach won’t be effective with porous materials such as grout (unsealed), woods, cement, etc..

It’s mighty against no-porous surfaces and will kill almost all types of molds online.

On porous surfaces, the chlorine in the bleach only is not strong enough to penetrate to the root level of these molds. It leaves moisture behind making the perfect environment for mold to regrow in.

Never mix bleach with ammonia or vinegar.

Mixing bleach with vinegar may release toxic fumes in the form of chlorine gas that’s very harmful if breathed in.

Understanding that, there are many other mold solutions that better at attacking porous surfaces and are also less harsh on you or the environment.

A perfect alternative may be baking soda and vinegar.

If you do decide to use bleach, here is what you will need to know:

  • Open nearby doors and windows to get Decent air flow
  • Combine 1 cup of bleach to no less than 1 gallon of water- mix completely.
  • Pour the mix into a jar with a spray nozzle
  • Spray the polluted areas evenly and let sit for 5-10 minutes
  • Scrub with sponge or bristled brush and wash clean.
  • For larger regions, you’ll be able to use a HEPA filtered vacuum.
  • Don’t wash out the region, allow the bleach continue to disinfect the mold.
  • Duplicate as needed.

Black Mold Removal with Tea Tree Oil

Getting rid of molds using treat tree oil has many benefits in comparison to using corrosive and poisonous chemicals.

It is a natural fungicide that’s very good at killing mold spores and ridding the smell of mould throughout your home.

It may work both as a cleaner and prevention agent.

The one thing you need to be worried about if using tea tree oil is not to consume it. It’s toxic if ingested.

Here is how you use it:

  • Combine 1 cup of water with one teaspoon of tea tree oil
  • Stir the mixture thoroughly and put into a spray bottle
  • Spay the contaminated area and wipe clean
  • If you don’t have a spray bottle feel free to use a towel to dampen the area
  • To utilize as prevention, wipe along taps and handles in your toilet

Black Mold Removal with Baking Soda

Eliminating black molds using baking soda is another fantastic green alternative that will satisfy your pocket and lungs.

Not only does it remove the odours from carpeting, fridges, and baths, but it will help to prevent them too!

  • For lighter molds, mix baking soda with water 50/50 to form a paste.
  • Insert this glue and let it dry in the polluted areas
  • After dry, scrub off with a brush.
  • Use a HEPA vacuum to scrub off if cleaning larger areas
  • For smaller regions utilize 1-2 tablespoons of baking soda into two cups of water
  • Use the same process as above, allowing dry and then scrubbing off.
  • Reapply if needed

Black Mold Removal with Hydrogen Peroxide

One of the top solutions for killing bacteria and allergens is hydrogen peroxide. On the count of being exceptionally inexpensive and very effective, it has my vote!

Unlike bleach or ammonia, hydrogen peroxide can be used on non-porous surfaces like forests or cement.

Be aware that hydrogen peroxide is light bleaching agent and may turn clothes different colours.

Here’s how it’s used in black mold program:

  • Mix a solution of two parts water and one part 3 percent hydrogen peroxide.
  • Place solution into a spray bottle
  • Apply on the contaminated areas and let dry for 5-10 minutes
  • Wipe clean let dry
  • Reapply if needed

Black Mold Removal together with Grapefruit Seed Extract

Employing this natural alternative is very similar to using the tea tree oil program. It’s non-toxic, disinfects, deodorizes, and keeps everyone safe!

The acids in the extract proceed to penetrate the mould after wiped away and also prevent future mold from coming back again.

Grapefruit seed extract may also be utilized as a prevention tool. It has little to no odor, so daily or weekly usage is approved.

The sole disadvantage to using grapefruit seed extract is its costs. It’ll run a little more than all of the other procedures. Health food stores usually carry this in the vitamins and supplements section.

Here is the Way to get rid of black mold with grapefruit seed extract:

  • First mix ten drops of the extract into a cup of water.
  • Pour the solution into a spray bottle and evenly mist the areas of contamination.
  • Permit the cleaning solution to dry on for at least 5-10 minutes.
  • You can let it soak for up to an hour to get deeper stains.
  • Clean and wipe off staying mold
  • Don’t rinse off application
  • Reapply if necessary

Black Mold Removal together with Vinegar

Vinegar is affordable and safe to use inside your home. Although a small smelly, it has mild acidic anti-bacterial properties that will stop most molds in its paths.

Do not worry, and the smell goes away after a couple of hours!

For the low expenses and being eco-friendly, vinegar is a fantastic green solution to bleach and ammonia.

Here’s how it’s done:

  • Either spray or pour vinegar on the affected regions. (No need for mixing anything here) Use a rag or brush to wash clean.
  • If you see it’s not doing the job, try adding baking soda or hydrogen peroxide into the mixture.
  • In the event, the mold contamination is too large to handle, make sure you telephone a mold remediation company to help.

5 Things That Make Home Uncomfortable

When walking into a room inside the house, consider how you feel. Is your environment inspiring? Or do you experience unpleasant feelings?

If the second feeling is right, you may look back at the decor and chaos in that space.

The reason, this can impact on your emotions every day, according to experts.

5 Things That Make Home Uncomfortable

1. Children’s Goods

It’s not just toys scattered on the floor. However, these items may include clothes, accessories, and children’s work.

“Chaos of children makes parents worried because it is difficult to clean and find space to store it,” said psychologist Susan Bartell.

Such concerns lead to the feeling of loss of control, that of the parent’s feelings with the children when things are not working properly.

The toy boxes also make parents feel that the house will never be clean, so guests may judge the house to fall apart.

“Parents also question how much money is spent when looking at some unused children’s items,” Bartell said.

2. Inheritance and gift items

Maybe you have some items given by your family or close friends.

Instead of thinking about them every time you see the item, you are more likely to get rid of it.

“We store inheritance or gift items even if we do not like or use because we feel guilty if we give it back to someone else,” Bartell said.

These items certainly affect the mood of having to store it and meet the space that can be used to store goods you like.

3. Childhood Goods

As a child, children have certain pets that never fall behind, such as a doll or pillow.

There are some people with this habit that continue into adulthood.

“Facing the fact that precious childhood things are no longer ‘magical’, it sometimes forces us to ask what is the source of our current pleasures,” says the author of “Inside the Flame: The Joy of Treasuring What You Already Have” Christina Waters.

Change always raises the question of who we are and what we want in life.

To find that the collection of dolls that have been owned since childhood is no longer interesting is a process of maturity.

4. Collection

Some old collections give you a load when you no longer like it. This just fills the space of your house.

“Collections relate to memory in a person’s life, and the difficulty of getting rid of this collection is a feeling that is often unconsciously going to eliminate that memory,” says psychiatrist Gail Saltz.

5. Unused hobby equipment

There is a time when you like a hobby, such as knitting. You begin to collect knitting equipment, especially various types of needles and threads.

Years later, when the hobby is gone, these items give a feeling of discomfort.

“Unused hobby utensils, contributing to chaos in your home It’s easier to collect hobby materials than to set aside time and effort to get rid of them,” says blogger behind Miss Minimalist Francine Jay.

According to him, people who often feel if they have a knit yarn cabinet will make them as knitters.

Although these threads and needles are not touched for months or even years.

Storing this equipment is also because people feel guilty for spending a fortune.